Rough & Ready Barrel Sight

The MVA Rough & Ready Sight is a rear barrel, v-notch blade sight with a flip-up staff for longer ranges. The eyedisc slide to adjust the elevation and then turns to positively lock down. A spring detent holds the staff in upright and horizontal positions. Includes three eyediscs, .47″, .059″, .074″ sized apertures and either 8-32 or original Remington .170-32 screw for mounting on the barrel. This cutout is 2.275″ long by .060″ deep, with a threaded hole on one end and a female dovetail on the receiver end.

The (1) screw configuration is designed for use on original Remington barrels that have the correct cutout. Our base matches the cutout on the original Remington barrel. The original guns used the .170-32 screws and a tap this size is no longer available, however we at MVA do produce the out-of-production screw to accommodate the original rifles.

The (2) screw configuration is for guns without the original cutout. It must mount on a flat surface and requires two 8-32 tapped holes in order to mount the sight. Weights 1.0 oz.